Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.


↳ QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

PROPER1(head1(X)) -> PROPER1(X)
S1(mark1(X)) -> S1(X)
PROPER1(adx1(X)) -> PROPER1(X)
INCR1(mark1(X)) -> INCR1(X)
ACTIVE1(adx1(cons2(X, L))) -> ADX1(L)
PROPER1(incr1(X)) -> INCR1(proper1(X))
PROPER1(incr1(X)) -> PROPER1(X)
TOP1(mark1(X)) -> TOP1(proper1(X))
ACTIVE1(tail1(X)) -> TAIL1(active1(X))
HEAD1(mark1(X)) -> HEAD1(X)
ACTIVE1(incr1(X)) -> ACTIVE1(X)
INCR1(ok1(X)) -> INCR1(X)
ADX1(mark1(X)) -> ADX1(X)
PROPER1(cons2(X1, X2)) -> PROPER1(X1)
PROPER1(tail1(X)) -> PROPER1(X)
TOP1(ok1(X)) -> ACTIVE1(X)
ACTIVE1(adx1(X)) -> ACTIVE1(X)
ACTIVE1(s1(X)) -> S1(active1(X))
PROPER1(s1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> TAIL1(proper1(X))
ACTIVE1(adx1(X)) -> ADX1(active1(X))
ACTIVE1(tail1(X)) -> ACTIVE1(X)
HEAD1(ok1(X)) -> HEAD1(X)
ACTIVE1(zeros) -> CONS2(0, zeros)
TOP1(mark1(X)) -> PROPER1(X)
ACTIVE1(adx1(cons2(X, L))) -> CONS2(X, adx1(L))
TAIL1(ok1(X)) -> TAIL1(X)
ACTIVE1(incr1(cons2(X, L))) -> INCR1(L)
PROPER1(adx1(X)) -> ADX1(proper1(X))
ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(incr1(cons2(X, L))) -> S1(X)
PROPER1(s1(X)) -> S1(proper1(X))
ACTIVE1(head1(X)) -> HEAD1(active1(X))
ACTIVE1(s1(X)) -> ACTIVE1(X)
S1(ok1(X)) -> S1(X)
ACTIVE1(nats) -> ADX1(zeros)
CONS2(mark1(X1), X2) -> CONS2(X1, X2)
ACTIVE1(cons2(X1, X2)) -> CONS2(active1(X1), X2)
TAIL1(mark1(X)) -> TAIL1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
PROPER1(head1(X)) -> HEAD1(proper1(X))
ACTIVE1(adx1(cons2(X, L))) -> INCR1(cons2(X, adx1(L)))
ACTIVE1(incr1(X)) -> INCR1(active1(X))
ACTIVE1(incr1(cons2(X, L))) -> CONS2(s1(X), incr1(L))
ADX1(ok1(X)) -> ADX1(X)
PROPER1(cons2(X1, X2)) -> CONS2(proper1(X1), proper1(X2))
TOP1(ok1(X)) -> TOP1(active1(X))
PROPER1(cons2(X1, X2)) -> PROPER1(X2)
CONS2(ok1(X1), ok1(X2)) -> CONS2(X1, X2)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

PROPER1(head1(X)) -> PROPER1(X)
S1(mark1(X)) -> S1(X)
PROPER1(adx1(X)) -> PROPER1(X)
INCR1(mark1(X)) -> INCR1(X)
ACTIVE1(adx1(cons2(X, L))) -> ADX1(L)
PROPER1(incr1(X)) -> INCR1(proper1(X))
PROPER1(incr1(X)) -> PROPER1(X)
TOP1(mark1(X)) -> TOP1(proper1(X))
ACTIVE1(tail1(X)) -> TAIL1(active1(X))
HEAD1(mark1(X)) -> HEAD1(X)
ACTIVE1(incr1(X)) -> ACTIVE1(X)
INCR1(ok1(X)) -> INCR1(X)
ADX1(mark1(X)) -> ADX1(X)
PROPER1(cons2(X1, X2)) -> PROPER1(X1)
PROPER1(tail1(X)) -> PROPER1(X)
TOP1(ok1(X)) -> ACTIVE1(X)
ACTIVE1(adx1(X)) -> ACTIVE1(X)
ACTIVE1(s1(X)) -> S1(active1(X))
PROPER1(s1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> TAIL1(proper1(X))
ACTIVE1(adx1(X)) -> ADX1(active1(X))
ACTIVE1(tail1(X)) -> ACTIVE1(X)
HEAD1(ok1(X)) -> HEAD1(X)
ACTIVE1(zeros) -> CONS2(0, zeros)
TOP1(mark1(X)) -> PROPER1(X)
ACTIVE1(adx1(cons2(X, L))) -> CONS2(X, adx1(L))
TAIL1(ok1(X)) -> TAIL1(X)
ACTIVE1(incr1(cons2(X, L))) -> INCR1(L)
PROPER1(adx1(X)) -> ADX1(proper1(X))
ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(incr1(cons2(X, L))) -> S1(X)
PROPER1(s1(X)) -> S1(proper1(X))
ACTIVE1(head1(X)) -> HEAD1(active1(X))
ACTIVE1(s1(X)) -> ACTIVE1(X)
S1(ok1(X)) -> S1(X)
ACTIVE1(nats) -> ADX1(zeros)
CONS2(mark1(X1), X2) -> CONS2(X1, X2)
ACTIVE1(cons2(X1, X2)) -> CONS2(active1(X1), X2)
TAIL1(mark1(X)) -> TAIL1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
PROPER1(head1(X)) -> HEAD1(proper1(X))
ACTIVE1(adx1(cons2(X, L))) -> INCR1(cons2(X, adx1(L)))
ACTIVE1(incr1(X)) -> INCR1(active1(X))
ACTIVE1(incr1(cons2(X, L))) -> CONS2(s1(X), incr1(L))
ADX1(ok1(X)) -> ADX1(X)
PROPER1(cons2(X1, X2)) -> CONS2(proper1(X1), proper1(X2))
TOP1(ok1(X)) -> TOP1(active1(X))
PROPER1(cons2(X1, X2)) -> PROPER1(X2)
CONS2(ok1(X1), ok1(X2)) -> CONS2(X1, X2)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 9 SCCs with 22 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TAIL1(mark1(X)) -> TAIL1(X)
TAIL1(ok1(X)) -> TAIL1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


TAIL1(mark1(X)) -> TAIL1(X)
TAIL1(ok1(X)) -> TAIL1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( mark1(x1) ) = 3x1 + 1


POL( ok1(x1) ) = 2x1 + 2


POL( TAIL1(x1) ) = 2x1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

HEAD1(ok1(X)) -> HEAD1(X)
HEAD1(mark1(X)) -> HEAD1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


HEAD1(ok1(X)) -> HEAD1(X)
HEAD1(mark1(X)) -> HEAD1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( mark1(x1) ) = 2x1 + 2


POL( HEAD1(x1) ) = 2x1


POL( ok1(x1) ) = 3x1 + 1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADX1(ok1(X)) -> ADX1(X)
ADX1(mark1(X)) -> ADX1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ADX1(ok1(X)) -> ADX1(X)
ADX1(mark1(X)) -> ADX1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ADX1(x1) ) = 2x1


POL( mark1(x1) ) = 2x1 + 2


POL( ok1(x1) ) = 3x1 + 1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S1(ok1(X)) -> S1(X)
S1(mark1(X)) -> S1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


S1(ok1(X)) -> S1(X)
S1(mark1(X)) -> S1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( S1(x1) ) = 2x1


POL( mark1(x1) ) = 2x1 + 2


POL( ok1(x1) ) = 3x1 + 1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

CONS2(mark1(X1), X2) -> CONS2(X1, X2)
CONS2(ok1(X1), ok1(X2)) -> CONS2(X1, X2)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


CONS2(mark1(X1), X2) -> CONS2(X1, X2)
CONS2(ok1(X1), ok1(X2)) -> CONS2(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( CONS2(x1, x2) ) = max{0, 2x1 + 2x2 - 1}


POL( mark1(x1) ) = 2x1 + 1


POL( ok1(x1) ) = x1 + 3



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

INCR1(ok1(X)) -> INCR1(X)
INCR1(mark1(X)) -> INCR1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


INCR1(ok1(X)) -> INCR1(X)
INCR1(mark1(X)) -> INCR1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( INCR1(x1) ) = 2x1


POL( mark1(x1) ) = 2x1 + 2


POL( ok1(x1) ) = 3x1 + 1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER1(s1(X)) -> PROPER1(X)
PROPER1(cons2(X1, X2)) -> PROPER1(X1)
PROPER1(cons2(X1, X2)) -> PROPER1(X2)
PROPER1(incr1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> PROPER1(X)
PROPER1(head1(X)) -> PROPER1(X)
PROPER1(adx1(X)) -> PROPER1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PROPER1(s1(X)) -> PROPER1(X)
PROPER1(cons2(X1, X2)) -> PROPER1(X1)
PROPER1(cons2(X1, X2)) -> PROPER1(X2)
PROPER1(head1(X)) -> PROPER1(X)
PROPER1(adx1(X)) -> PROPER1(X)
The remaining pairs can at least be oriented weakly.

PROPER1(incr1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> PROPER1(X)
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( incr1(x1) ) = 3x1


POL( PROPER1(x1) ) = 3x1


POL( head1(x1) ) = 2x1 + 3


POL( s1(x1) ) = 2x1 + 3


POL( adx1(x1) ) = 2x1 + 3


POL( tail1(x1) ) = 2x1


POL( cons2(x1, x2) ) = 2x1 + 2x2 + 1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER1(incr1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> PROPER1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PROPER1(incr1(X)) -> PROPER1(X)
PROPER1(tail1(X)) -> PROPER1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( tail1(x1) ) = 2x1 + 2


POL( incr1(x1) ) = 3x1 + 1


POL( PROPER1(x1) ) = 2x1



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
ACTIVE1(s1(X)) -> ACTIVE1(X)
ACTIVE1(tail1(X)) -> ACTIVE1(X)
ACTIVE1(adx1(X)) -> ACTIVE1(X)
ACTIVE1(incr1(X)) -> ACTIVE1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE1(tail1(X)) -> ACTIVE1(X)
ACTIVE1(adx1(X)) -> ACTIVE1(X)
ACTIVE1(incr1(X)) -> ACTIVE1(X)
The remaining pairs can at least be oriented weakly.

ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
ACTIVE1(s1(X)) -> ACTIVE1(X)
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( incr1(x1) ) = 2x1 + 3


POL( ACTIVE1(x1) ) = 3x1


POL( s1(x1) ) = 3x1


POL( head1(x1) ) = 2x1


POL( adx1(x1) ) = x1 + 1


POL( tail1(x1) ) = x1 + 1


POL( cons2(x1, x2) ) = 3x1 + 3x2



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
ACTIVE1(s1(X)) -> ACTIVE1(X)

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE1(head1(X)) -> ACTIVE1(X)
ACTIVE1(cons2(X1, X2)) -> ACTIVE1(X1)
ACTIVE1(s1(X)) -> ACTIVE1(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( s1(x1) ) = 3x1 + 2


POL( head1(x1) ) = x1 + 2


POL( ACTIVE1(x1) ) = 2x1


POL( cons2(x1, x2) ) = 2x1 + 3x2 + 2



The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ PisEmptyProof
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TOP1(ok1(X)) -> TOP1(active1(X))
TOP1(mark1(X)) -> TOP1(proper1(X))

The TRS R consists of the following rules:

active1(incr1(nil)) -> mark1(nil)
active1(incr1(cons2(X, L))) -> mark1(cons2(s1(X), incr1(L)))
active1(adx1(nil)) -> mark1(nil)
active1(adx1(cons2(X, L))) -> mark1(incr1(cons2(X, adx1(L))))
active1(nats) -> mark1(adx1(zeros))
active1(zeros) -> mark1(cons2(0, zeros))
active1(head1(cons2(X, L))) -> mark1(X)
active1(tail1(cons2(X, L))) -> mark1(L)
active1(incr1(X)) -> incr1(active1(X))
active1(cons2(X1, X2)) -> cons2(active1(X1), X2)
active1(s1(X)) -> s1(active1(X))
active1(adx1(X)) -> adx1(active1(X))
active1(head1(X)) -> head1(active1(X))
active1(tail1(X)) -> tail1(active1(X))
incr1(mark1(X)) -> mark1(incr1(X))
cons2(mark1(X1), X2) -> mark1(cons2(X1, X2))
s1(mark1(X)) -> mark1(s1(X))
adx1(mark1(X)) -> mark1(adx1(X))
head1(mark1(X)) -> mark1(head1(X))
tail1(mark1(X)) -> mark1(tail1(X))
proper1(incr1(X)) -> incr1(proper1(X))
proper1(nil) -> ok1(nil)
proper1(cons2(X1, X2)) -> cons2(proper1(X1), proper1(X2))
proper1(s1(X)) -> s1(proper1(X))
proper1(adx1(X)) -> adx1(proper1(X))
proper1(nats) -> ok1(nats)
proper1(zeros) -> ok1(zeros)
proper1(0) -> ok1(0)
proper1(head1(X)) -> head1(proper1(X))
proper1(tail1(X)) -> tail1(proper1(X))
incr1(ok1(X)) -> ok1(incr1(X))
cons2(ok1(X1), ok1(X2)) -> ok1(cons2(X1, X2))
s1(ok1(X)) -> ok1(s1(X))
adx1(ok1(X)) -> ok1(adx1(X))
head1(ok1(X)) -> ok1(head1(X))
tail1(ok1(X)) -> ok1(tail1(X))
top1(mark1(X)) -> top1(proper1(X))
top1(ok1(X)) -> top1(active1(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.